Canon iR C6800 Series Portable Manual page 300

Chapter 5
Subheadin
SENS-INT
MTR-CHK
TRY-A4
TRY-A5R
TRY-LTR
TRY-LTRR
5-106
FEEDER>FUNCTION
g
Use it to adjust the sensitivity of the individual sensors of the feeder.
Select the item, and press the OK key to start feeder sensor
initialization, turning the screen indication to 'ACT'. The operation
will end automatically, turning the indication to 'OK'.
Use it to check the motor and the like of the ADF on its own.
Operation
1) Press [MOTOR-CHK] to highlight.
2) Enter the number of the component using the keypad.
3) Press the OK key.
4) Press [MOTOR-ON[ to start checking the operation.
Settings
0: pickup motor
1: feed motor
2: delivery reversal motor
4: lock motor
at time of shipment: factory default
upon RAM initialization: 0
Use it to execute automatic adjustment (A4 Width) for DF original
paper width detection.
Use it to execute automatic adjustment (A5R width) for DF original
paper width detection.
Use it to execute automatic adjustment (LTR width) for DF original
paper width detection.
Use it to execute automatic adjustment (LTR-R width) for DF original
paper width detention.
T-5-60
Contents Level
1
1
1
1
1
1