Canon iR C6800 Series Portable Manual page 211

Co Sensor type Senso
de r
notati
on
000 feed sensor PI8
5
000 feed sensor PI8
6
000 delivery reversal PI9
7 sensor
000 delivery reversal PI9
8 sensor
004 post-separation PI7
2 sensor
004 registration sensor PI1
3
004 registration sensor PI1
4
004 feed sensor PI8
5
004 feed sensor PI8
6
004 delivery reversal PI9
7 sensor
004 delivery reversal PI9
8 sensor
007 wrong timing -
1
Description
- read sensor does not detect paper when a feed of 364.2 mm
(182.1 x 2) has been made from the point of registration.
- the read sensor does not detect paper when a feed of 157.4
mm (78.7 x 2) has been made from the point of No. 2
registration.
- the read sensor detects paper when a feed of 500 mm (if
extra-length, +200 mm) has been made from the start of
feed after a temporary stop at point of reading.
- the read sensor detects paper when a feed of 514 mm has
been made after the start of feed from the standby point in
mix mode (LTRR/LGL identified).
- if not in high-speed duplex mode, the delivery sensor does
not detect when a feed of 132.1 mm has been made after
paper has reached the leading edge downstream roller with
respect to the activation of the read sensor.
- the delivery sensor does not detect paper when a feed of
50 mm has been made after the start of feed during a switch-
back operation.
the delivery sensor detects paper when a feed of 161.9 mm
has been made from the end of reading the trailing edge.
1st; stationary jam at the post-separation sensor
1st; not reaching the registration sensor
1st; stationary at the registration sensor
1st; not reaching the read sensor
1st; stationary at the read sensor
1st; not reaching heat delivery sensor
1st; stationary sensor at the delivery sensor
error software timing