Canon iR C6800 Series Portable Manual page 82

Chapter 2
1) Open the packing box, and take out the new color
developing unit.
2) Remove the screw [1], and free the 4 hooks [2];
then, remove the developing assembly lid [3].
[1]
[3]
[2]
F-2-30
3) Even out the starter by shaking the container about
10 times.
4) Open the lid [2] of the starter bottle [1]; then,
remove the middle lid [3], and close the lid.
[2] [1]
F-2-31
5) Supply half the starter so that it is even in the
lengthwise direction around the stirring screw inside
the color developing unit.
2-28
[3]
F-2-32
6) Turn the developing gear 5 to 6 times by hand in the
direction indicated in the figure so that the starter will
be even inside the unit.
F-2-33
7) Supply the remaining half of the starter around the
stirring screw inside the color developing unit.
8) Turn the developing gear 5 to 6 times once again so
that the starter inside the unit is even.
9) Move the starter found on the inner side of the
container wall off the wall.
F-2-34
[1]