Canon iR C6800 Series Portable Manual page 347

Subheadi
ng
CONTRO Use it to impose a limit on the use of a control card for a PDL job.
L
Settings
0: do not limit
1: limit
at time of shipment/upon RAM initialization: 0
B4-L- For soft counters 1 through 6, use it to specify whether B4 should be
CNT counted as large-size or small-size.
Settings
0: small-size
1: large-size
at time of shipment/upon RAM initialization: 0
COPY- Disabling Copy Job Reservation When the Card Reader/Coin Vendor Is
JOB in Use
Use it when it is necessary to prevent multiple jobs as when the CCX or
coin robot is in use.
Settings
0: permit copy job reservation
1: prohibit copy job reservation
at time of shipment/upon RAM initialization: 0
TAB- Use it to enable/disable 180-deg rotation of a landscape image for a tab
ROT
sheet.
Settings
0: do not rotate
1: rotate
at time of shipment/upon RAM initialization: 0
IDPRN- Use it to switch over job types for the group control counter.
SW
Settings
0: count in PRINT category: box print, report print, SEND local print
PDL print
1: count in PRINT category: report print, end local print, PDL print
at time of shipment/upon RAM initialization: 0
T-5-73
COPIER>OPTION>USER
Contents Level
1
1
1
1
1