Canon iR C6800 Series Portable Manual page 312

Subheadi
ng
FDW- Use it to select face-up or face-down delivery when multiple sets are
DLV
specified.
When multiple sets are specified, the machine uses face-up delivery. To
ensure a specific level of stacking performance, however, the machine
offers a mode for face-down delivery.
(This choice is not valid if a finisher is installed.)
0:use face-up delivery if no more than 1 original
1:use face-up delivery if no more than 1 original, but face-down delivery
if set for multiple sets
at time of shipment/upon RAM initialization: 0
RMT- Use it to switch the language of the remote UI used through the Web.
LANG Method of Adjustment
Use the +/- key to select the appropriate language code.
IFAX- Use it to limit the number of output lines for when a large volume of data
LIM is received over i-fax.
settings range
0: no limit
0 to 999
at time of shipment/upon RAM initialization: 500
TR-CLN Use it to execute the cleaning sequence designed to avoid soiling on the
back of paper caused by the secondary transfer roller.
77-mm back soiling preventive mode
Settings:
0: execute only in H/H environment
1: disable in all environments
2: enable in all environments
at time of shipment/upon RAM initialization: 0
SMTPTX Use it to change the number of the SMTP transmission port.
PN
settings range
0 to 65535 (in increments of 1)
at time of shipment/upon RAM initialization: 25
SMTPRX
Use it to change the number of the SMTP reception port.
PN
settings range
0 through 65535 (in increments of 1)
at time of shipment/upon RAM initialization: 25
COPIER>OPTION>BODY
Contents Level
2
2
2
2
2
2