Canon iR C6800 Series Portable Manual page 260

Chapter 5
Subheadin
BLANK-B
BLANK-C1
to 4
BLANK-PD
<V-CONT>
Subheadin
EPOTOEST
5-66
COPIER>ADJUST>BLANK
g
Use it to enter the adjustment value for the non-image width (trailing
edge).
Method of Adjustment
- if you have initialized the RAM on the main controller PCB or
replaced the SRAM PCB, enter the value indicated on the service
label.
Range of Adjustment: 0 to 1000
at time of shipment factory measurement value
upon RAM initialization: +47
Use it to set the leading edge margin for the right deck.
Method of Adjustment
The value herein will be used to affect the value of BLANK-T.
Range of Adjustment: -35 to 35 (unit: 0.1 mm)
at time of shipment: factory measurement /upon RAM initialization: 0
Use it to set the leading edge margin for the optional deck.
Method of Adjustment
The value herein will be used to affect the value of BLANK-T.
Range of Adjustment: -35 to 35 (unit: 0.1 mm)
at time of shipment: factory measurement /upon RAM initialization: 0
COPIER>ADJUST>V-CONT
g
Set it to adjust the potential offset value.
Range of Adjustment-300 to 300 (unit: 0.1 V)
at time of shipment/upon RAM initialization: 0
Contents
T-5-34
Contents
Level
1
1
1
Level
1