Canon iR C6800 Series Portable Manual page 350

Subheadi
ng
MF-LG- Use it to enable/disable the indication of the Extra length mode.
ST
Settings
0: normal
1: indicate key on extension mode screen
at time of shipment/upon RAM initialization: 0
CNT- Use it to enable/disable the indication of the serial number in response to
DISP a press on the Counter Check key.
Settings
0: indicate serial number
1: do not indicate serial number
at time of shipment/upon RAM initialization: 0
OP-SZ- Use it to enable/disable the original size detection mechanism in book
DT mode.
In copyboard mode, the user either has to enter an original size or have
the machine automatically detect the size of the original.
Settings
0: require input of original size from control panel
1: detect original size automatically
at time of shipment/upon RAM initialization: 0
NW- Use it to enable/disable the network scan function.
SCAN
Settings
0: no not permit
1: permit (invalid in the absence of a UFR or open I/F board)
at time of shipment/upon RAM initialization: 0
HDCR-
Use it to enable/disable the indication of HDD initialization mode (user
DSP mode).
Settings
0: do not indicate and do not initialize
1: initialize once using 0s
2: initialize once using random data
3: initialize 3 times using random data
at time of shipment/upon RAM initialization: 0
JOB- Use it to set the intervals of interrupt jobs.
INVL
Settings
0: standard (permit the next job)
1: permit output of next job after delivery of last page of interrupt job
2: permit output of next job after delivery of last page of all jobs
at time of shipment/upon RAM initialization: 0
COPIER>OPTION>USER
Contents Level
2
2
2
2
2
2