Chapter 1
roller is freed).
[1]
[2]
F-1-4
2-5 Check to find out the position of the marking [2] on the drum flange in relation to the protrusion [1] of the drum
fixing member. (checking the drum phase)
In the figure, the marking [2] on the drum flange is at "." on the left and ".." on the right in relation to the protrusion
[1] of the drum fixing member.
[2]
[1]
[2]
F-1-5
At this time, check the drum phase label [1] attached behind the process unit cover. If there is no check mark on the
label indicating the present phase position, be sure to put a check mark.
1-26