Canon iR C6800 Series Portable Manual page 290

COPIER>FUNCTION>CLEAR
Subheadin
g
ERR Use it to clear an error code (E000, E001, E002, E003).
Method of Operation
1) Select the item, and press the OK key.
2) Turn off and then on the main power.
DC-CON
Use this item to reset the RAM on the DC controller PCB.
The RAM will not actually be reset until the main power switch has
been turned off and then on.
Method of Operation
print out the service mode settings using the following service mode
item: COPIER>FUNCTION>MISC-P>P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then on the main power switch.
4) As necessary, enter the settings that have been printed out using 'P-
PRINT'.
R-CON Use it to reset the RAM on the reader controller PCB.
Method of Operation
The RAM will not be cleared until the main power switch has been
turned off and then on again.
2) Select the item, and press the OK key.
3) Turn off and then on the main power.
4) As necessary, enter the settings printed out using 'PRINT'.
JAM- Use it to reset the jam history.
HIST The jam history will not be reset until the OK key is pressed.
Method of Operation
1) Select the time, and press the OK key.
ERR- Use it to reset the error history.
HIST The error history will not be cleared until the OK key is pressed.
Method of Operation
1) Select the item, and press the OK key.
PWD- Use it to initialize the password of the system administrator.
CLR The password will not be initialized until the OK key is pressed.
Method of Operation
1)Select the item, and press the OK key.
ADRS-BK Use it to reset the address book data.
The address book data will not be reset until the main power switch has
been turned off and then on.
1) Select the item, and press the OK key.
2) Turn off and then on the main power switch.
T-5-55
Contents Level
1
1
1
1
1
1
1