Canon iR C6800 Series Portable Manual page 216

Chapter 5
Subheadi
ng
SGNL-Y/
M/C
DENS-S-
Y/M/C
D-Y/M/C
-TRGT
P-SENS-
P
DEV-DC-
Y/M/C/K
D-CRNT-
P/S
P-SENS-S
DENS-Y/
M/C-H
DS-S-Y/
M/C/-H
P-LED-
DA
SPL-LG-
Y/M/C
PSENSP-
S
PSENSP-
P
<MISC>
5-22
COPIER>DISPLAY>DENS
Use it to indicate the measurement of the toner on the developing
cylinder (YMC).
The value is updated when the machine performs toner supply operation
after the main paper switch is turned on.
Optimum value: 225 to 863
Use it to indicate the measurement (YMC) of the density of the sample
image formed during ATR control.
Use it to indicate the target value (YMC) for toner.
Indicates the result of background detection (P wave component)
executed as part of analog patch detection.
The currently valid value will be indicated only upon execution of analog
patch detection after the power is turned on.
Use it to indicate the output level of the developing DC voltage (YMCB)
generated most recently.
Use it to indicate the measurement (P wave, S wave) of the dark current
at time of ATR control.
Use it to indicate the measurement of the intensity of light (S wave) of
the background (drum) at time of ATR control.
Use it to indicate the history of ATR sensor measurements (YMC; latest
8).
Use it to indicate the history of the results of patch image detection
(YMC; latest 8).
Use it to indicate the D/A settings for the patch image sensor.
Use it to indicate the present level of the density reference signal for the
YMC developing assembly.
Use it to indicate the measurement of the background at time of analog
patch operation (S wave component).
Use it to indicate the measurement of the background at time of analog
patch operation (P wave component).
Contents Level
1
2
2
2
2
2
2
2
2
2
2
2
2