Canon iR C6800 Series Portable Manual page 259

Subheadin
g
BLANK-T Use it when entering the adjustment value for the non-image width
(leading edge).
Method of Adjustment
- if you have initialized the RAM on the main controller PCB or
replaced the SRAM PCB, enter the value indicated on the service
label.
Range of Adjustment: 0 to 1000
at time of shipment factory measurement value
upon RAM initialization: +94
BLANK-L Use it to enter the adjustment value for the non-image width (left
edge).
Method of Adjustment
- if you have initialized the RAM on the main controller PCB or
replaced the SRAM PCB, enter the value indicated on the service
label.
Range of Adjustment: 0 to 1000
at time of shipment factory measurement value
upon RAM initialization: +59
BLANK-R Use it to enter the adjustment value for the non-image width (right
edge).
Method of Adjustment
- if you have initialized the RAM on the main controller PCB or
replaced the SRAM PCB, enter the value indicated on the service
label.
Range of Adjustment: 0 to 1000
at time of shipment factory measurement value
upon RAM initialization: +59
T-5-33
COPIER>ADJUST>BLANK
Contents Level
1
1
1