Table of Contents
Advertisement
www.netcommlimited.com
5.5.4
Upload Firmware
This page allows you to upgrade the Smart Hub's internal software. To upgrade the firmware of your Smart Hub,
you need to download the upgrade image file to your local hard disk, and then click the Browse button to locate
the firmware file on your computer. The firmware loaded on the Smart Hub can be upgraded by selecting the
"Upload Firmware" menu item under the "Administration" tab in the Advanced View of the Management Console.
Once you have selected the new firmware file, click 'Apply' to start the upgrade process.
The upgrade process takes several minutes, so please be patient whilst this process is carried out. All lights
on the front of the Smart Hub will flash during the firmware upgrade. Please make sure the power supply is
uninterrupted during the upgrade process.
5.5.5
Settings Manager
This page allows you to import/export the system settings, reset your Smart Hub to factory defaults, or reboot your
Smart Hub. The Smart Hub's configuration settings can be managed by selecting the "Settings Manager" menu
item under the "Administration" tab in the Advanced View of the Management Console.
Telus smart Hub
3G8WV-TS
39
Advertisement
Table of Contents
Need help?
Do you have a question about the Telus Smart Hub and is the answer not in the manual?
Questions and answers