Maintenance
Cleaning System Components
Clean Cycle Counter
The control panel tabulates the number of times the combo oven
has been cleaned:
1. If the unit is on, turn it off by pressing the ON touch pad.
2. Press and hold the ZERO, "0", touch pad button while turning the unit
on by pressing the ON touch pad. The timer display will show the clean
cycle count.
3. The count will display for 10 seconds and then automatically reset
for normal operation.
Re-Boot
When the control panel will not accept commands re-boot as following instructions:
1. With the front control panel OFF, hold in the numeral #1 and turn the front
control panel ON by pressing the ON touch pad.
Temperature Display F or C Degrees
To change the display from F to C or C to F proceed as follows:
1. With the front control panel OFF, hold in the numeral #5 on the touch pad and
turn the front control panel ON by pressing the ON touch pad.
2. F or C will be displayed in the TEMPERATURE window.
3. To change the display, touch the #5 on the touch pad and the TEMPERATURE
window will change.
4. When the desired display appears, touch the START on the touch pad.
5. DONE will appear in the TIME window for 5 seconds.
8-68
(Revised 1/02)
Need help?
Do you have a question about the CC20-E and is the answer not in the manual?