Groen CC20-E Operator's Manual page 310

Hide thumbs Also See for CC20-E:
Table of Contents

Advertisement

Maintenance
Daily Cleaning Instructions
CC10-G and CC20-G Units With
Top Mounted Deliming Port
General
Cleaning should be done daily to help ensure proper operation. It makes the
cleanup process faster too! ALWAYS USE HOT PADS WHEN HANDLING HOT
OVEN PANELS OR RACKS. DO NOT REMOVE INNER PANELS UNTIL THE
FAN HAS STOPPED.
Recommended Tools & Cleaners:
1. Lime Away to clean steam generator
2. Oven degreaser [i.e. Encompass from ECOLAB or Non-Caustic Easy-off]
3. Nylon scrub pad
4. Cloth and sponge.
Procedure
1. Take unit out of mode and clear timer. Enter 99 into timer. CL will be displayed
on timer display.
2. Pour 1 pint (for CC10-G) or two pints (for CC20-G) of Lime Away through port
on top left of oven.
3. If HOT light is on, follow fast cool instructions. (See Operator Manual)
4. Thoroughly coat entire cooking cavity panels, including pan racks, with oven
degreaser.
5. Close door. Press START. CL:45 will appear on the timer display. The unit will
automatically complete the deliming cycle and cleaning cycle and count down
to CL:00. When 00:00 appears in the time display window and the beeper
sounds for 5-seconds, the cleaning cycle is complete.
6. Turn oven off, let cool, remove inner panels and thoroughly wipe down cooking
cavity and oven door gasket with clean water. If any baked on residue is still
present, use a nylon scrub pad and rinse again.
[REFER TO OWNER'S MANUAL FOR
DETAILED CLEANING INSTRUCTIONS]
8-66
(Revised 1/02)

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CC20-E and is the answer not in the manual?

This manual is also suitable for:

Cc10-eC/2gCc10-gCc20-gC/2-e

Table of Contents

Save PDF