Single Oven - Groen CC20-E Operator's Manual

Service Code Information Block
Code 6: Indicates a problem in the boiler temperature probe circuit.
ASK THE CUSTOMER:
CAN OVEN BE
OPERATED BEFORE
SERVICE?
PARTS TO TAKE ON
SERVICE CALL:
Description
Boiler Temperature Probe Kit
Boiler Temperature Probe Wire
Harness
Relay Board
Control Panel

Single Oven

Cook Only
Cook and Hold
Double-Stacked
Top, Cook Only
Bottom, Cook Only
Top, Cook and Hold
Bottom, Cook and Hold
EPROM
(Revised 1/02)
If service code 6 is displayed, refer to the following information block and
troubleshooting table. Read the information block before making a service call,
and use Table 6 if a service call is required.
Ask the customer to reset the controls (see page 6-3). Select Steam mode.
If code 6 reappears, a service call is required. Also ask the customer for the
oven type (model and serial numbers) what type of control panel (Cook only
or Cook and Hold option) is installed on the unit. If the unit is a CC10-E, find
out if it is a single or double-stacked unit. Remember, for the CC10-E ovens,
control panels cannot be interchanged between single and double-stacked
ovens, nor can they be interchanged between the upper and lower ovens of a
double-stacked unit.
Yes, in Oven mode only.
NOTICE: Be sure to take the Service Manual and the T-Cal Box (old electronics)
(P/N 074821) with you on the service call. Use only Groen Certified parts.
CC10-E
077804
________
112966
112960
112961
112960
112960
112961
112961
112954
SERVICE CODES
Part Number
CC20-E CC10-G
083416 085187
________ 090704
112964 112964
112960 112960
112961 ________
112960 112960
112960 112960
112961 ________
112961 ________
112955 112957
Service Code 6
CC20-G
085187
090704
112964
112960
_______
112960
112960
________
________
112957
6-19