Groen CC20-E Operator's Manual page 300

Maintenance
Replacement Procedures
Oven Manifold
Removal
1. Turn off main gas supply. Remove main gas valve. See page 8-54.
2. Disconnect electrical leads from oven manifold valve.
3. Remove oven manifold.
4. Replace flame holders and/or jets if necessary.
5. If necessary, replace oven manifold valve.
Installation
1. Apply anti-seize lubricant on oven manifold mounting screws. Install
oven manifold and tighten mounting screws.
2. Connect electrical leads to oven manifold valve.
3. Install main gas valve. See page 8-55.
8-56
(Revised 1/02)