Reading Parameters - WEG CFW501 V1.8X Programming Manual

15 READING PARAMETERS

In order to simplify the view of the main inverter reading variables, you may directly access the READ – "Reading
Parameters" menu of the CFW501 Remote HMI.
It is important to point out that all the parameters of this group can only be viewed on the HMI display, and cannot
be changed by the user.
P0001 – Speed Reference
Adjustable 0 to 65535 rpm
Range:
Properties:
ro
Access groups READ
via HMI:
Description:
This parameter presents, regardless of the origin source, the speed reference value in rpm (factory setting).
P0002 – Output Speed (Motor)
Adjustable 0 to 65535 rpm
Range:
Properties:
ro
Access groups
READ
via HMI:
Description:
Parameter P0002 indicates the speed imposed on the inverter output in rpm (factory setting), with filter of 0.5 s.
P0003 – Motor Current
Adjustable
0.0 to 200.0 A
Range:
Properties: ro
Access groups
READ
via HMI:
Description:
It indicates the inverter output current in amperes rms (Arms).
P0004 – DC Link Voltage (Ud)
Adjustable
0 to 2000 V
Range:
Properties: ro
Access groups READ
via HMI:
Description:
It indicates the DC link direct current voltage in Volts (V).
Parâmetros de Leitura
Factory
Setting:
Factory
Setting:
Factory
Setting:
Factory
Setting:
CFW501 | 15-1
15