WEG CFW501 V1.8X Programming Manual page 158

SoftPLC
P1003 – SoftPLC Applicative Selection
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
It allows the user to select the CFW501 built in applications.
P1003
It defines that the application to be executed on the SoftPLC is the one uploaded by the user by means of the
0
"WLP" programming tool or flash memory module "CFW500-MMF".
It defines that the application to be executed on the SoftPLC is the HVAC. Refer to
1
on page 18-1
NOTE!
One part of the HVAC functions is directly implemented on the CFW501 firmware and the other part
on the SoftPLC program; in this case the related parameters are in the range starting from P1010.
Thus, by setting P1003 = 0, those functions on SoftPLC will be discarded.
For further information about the user's application on the CFW501, refer to the SoftPLC manual.
P1010 to P1079 – SoftPLC Parameters
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
They are composed of parameters with use defined by the application selected on parameter P1003.
P1010 – Version of the HVAC Functions
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
It indicates the version of the HVAC applicative resident on the CFW501.
17
17-2 | CFW501
0 = User
1 = HVAC
cfg
HVAC
Table 17.1: Parameter P1003 option description
for further details.
-32768 to 32767
HVAC
0.00 to 100.00
ro
HVAC
Description
Factory 1
Setting:
chapter 18 HVAC FUNCTIONS
Factory
0
Setting:
Factory
Setting: