WEG CFW501 V1.8X Programming Manual page 126

Digital and Analog Inputs and Outputs
a) RUN/STOP
It enables or disables the motor rotation through the acceleration and deceleration ramp.
b) GENERAL ENABLE
It enables the inverter spin through the acceleration ramp and disables it by cutting off the pulses immediately,
the motor stops by inertia.
c) QUICK STOP
When inactive, it disables the inverter by the 3
12
12-18 | CFW501
Aceleration ramp
Output
speed
Active
DIx Inactive
Figure 12.6: Example of the Run-Stop function
Aceleration ramp
Output
speed
Active
DIx Inactive
Figure 12.7: Example of the general enable function
Ramp by P0106.
rd
Output
speed
Active
DIx - Quick stop
Figure 12.8: Example of the quick stop function
Deceleration
ramp
Time
Time
Motor runs free
Time
Time
P0106 -
Deceleration ramp
Time
Inactive
Time