WEG CFW501 V1.8X Programming Manual page 154

Parâmetros de Leitura
P0044 – kWh Output Energy
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
It indicates the energy consumed by the motor.
It indicates up to 65535 kWh, and then it gets back to zero.
By setting P0204 = 4, the value of the parameter P0044 is reset to zero.
This value is kept even when power is removed from the inverter.
NOTE!
The value indicated in this parameter is calculated indirectly, and must not be used to measure the
energy consumption.
P0047 – CONF Status
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
This parameter shows the origin situation of the CONFIG mode. Refer to
STATUS on page
The reading parameters in the range from P0048 to P0075 are detailed in
page 14-8.
The reading parameters P0295 and P0296 are detailed in the
The reading parameters P0680 and P0690 are detailed in the
STATUS on page
15
15-6 | CFW501
0 to 65535 kWh
ro
READ
0 to 999
ro
READ
5-12.
7-10.
Factory
Setting:
Factory
Setting:
section 5.7 SITUATIONS FOR CONFIG
section 14.15 FAULT HISTORY on
section 6.1 INVERTER DATA on page
section 7.3 CONTROL WORD AND INVERTER
6-1.