WEG CFW501 V1.8X Programming Manual page 167

P1011 – Main PID Controller Automatic Setpoint
Adjustable -32768 to 32767
Range:
Properties:
Access groups HVAC
via HMI:
Description:
This parameter defines the value of Main PID controller setpoint in engineering unit when it is in automatic mode.
NOTE!
This parameter is displayed as the selection in the indirect engineering unit 1 parameters (P0510
and P0511).
P1014 – Main PID Controller Manual Setpoint
Adjustable 0.0 to 100.0 %
Range:
Properties:
Access groups HVAC
via HMI:
Description:
This parameter defines the value of Main PID controller setpoint when it is in manual mode.
P1015 – Process Variable of the Main PID Controller
Adjustable -32768 to 32767
Range:
Properties: ro
Access groups HVAC
via HMI:
Description:
This parameter shows the process variable actual value of the main PID controller in engineering unit.
NOTE!
This parameter will be viewed according to the selection of the parameters for the engineering unit
1 (P0510 and P0511).
P1016 – Main PID Controller Output
Adjustable
0.0 to 100.0 %
Range:
Properties:
ro
Access groups HVAC
via HMI:
Description:
This parameter indicates the actual value of Main PID controller output.
HVAC Functions
Factory 0
Setting:
Factory 0.0 %
Setting:
Factory
Setting:
Factory
Setting:
CFW501 | 18-9
18