WEG CFW501 V1.8X Programming Manual page 50

Basic Instructions for Programming and Settings
5
Properties:
Access groups
via HMI:
Description:
This parameter selects the engineering unit that will be viewed in the user's parameter of the SoftPLC which is
associated to it, that is, any user's parameter of the SoftPLC that is associated to the indirect engineering unit
2 will be viewed in this format on the CFW501 HMI.
NOTE!
Parameters P1060, P1062, P1073, P1074, P1076 and P1078 of the external PID controller (HVAC
functions) are associated to the indirect engineering unit 2.
5-8 | CFW501
5 = ms
6 = none
7 = m
8 = none
9 = none
10 = %
11 = °C
12 = none
13 = Hz
14 = none
15 = h
16 = W
17 = kW
18 = none
19 = none
20 = min
21 = °F
22 = bar
23 = mbar
24 = psi
25 = Pa
26 = kPa
27 = MPa
28 = mwc (meter of water column)
29 = mca (metro de coluna d'água)
30 = gal
31 = l (litro)
32 = in
33 = ft
34 = m³
35 = ft³
36 = gal/s
37 = gal/min (= GPM)
38 = gal/h
39 = l/s
40 = l/min
41 = l/h
42 = m/s
43 = m/min
44 = m/h
45 = ft/s
46 = ft/min
47 = ft/h
48 = m³/s
49 = m³/min
50 = m³/h
51 = ft³/s
52 = ft³/min
53 = ft³/h
HMI