WEG CFW501 V1.8X Programming Manual page 146

Faults and Alarms
P0054 – Temperature in the IGBTs Last Fault
P0064 – Temperature in the IGBTs Second Fault
P0074 – Temperature in the IGBTs Third Fault
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
These parameters indicate the IGBTs temperature at the moment of the occurred fault.
P0055 – Logical Status Last Fault
P0065 – Logical Status Second Fault
P0075 – Logical Status Third Fault
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
It records the inverter logical status of P0680 at the moment of the occurred fault. Refer to
WORD AND INVERTER STATUS on page
P0080 – Last Fault in "Fire Mode"
P0081 – Second Fault in "Fire Mode"
P0082 – Third Fault in "Fire Mode"
Adjustable
Range:
Properties:
14
Access groups
via HMI:
Description:
These parameters indicate the last three faults that occurred on the inverter while the "Fire Mode" was active.
14-10 | CFW501
-20 to 150 ºC
ro
READ
0000h to FFFFh
ro
READ
7-10.
0 to 9999
ro
READ
Factory
Setting:
Factory
Setting:
section 7.3 CONTROL
Factory 0
Setting: