Selecting The Source And Destination Channels - Sony PCM-3348HR Operation Manual

5-4-2 Selecting the Source and
Destination Channels
This section describes the procedure by way of an
example, for copying a stereo signal, with the
following source channel and destination channel
settings.
• First source channel: Channel 1
•
Second source channel: Channel 2
• First destination channel: Channel 3
• Second destination channel: Channel 4
Procedure
Use the following procedure to make the channel
settings as described above.
1
Press and light the SOUND MEMORY button.
The channel display appears as shown below.
Flashing
STEREO SOUND MEMORY/DIGITAL COPY
DIGITAL COPY
SOURCE
SOUND MEMORY
CH
MEM MEM MEM
PLAY STOP REC
2
Press the INPUT button or REPRO button for the
first source channel (channel 1 in this example), so
that it starts flashing.
Press the INPUT button to copy the input signal,
and the REPRO button to copy the playback
signal.
The channel number input appears on the upper
source channel display.
Lit
SCROLL
CH
MODE
SET
DESTINATION
CH
FWD/REV
BEFORE AFTER
INVERT
START END
EDIT EDIT
Lit
STEREO SOUND MEMORY/DIGITAL COPY
DIGITAL COPY
SOURCE
SOUND MEMORY
CH
MEM MEM MEM
PLAY STOP REC
Flashing
3
Press the INPUT button or REPRO button for the
second source channel (channel 2 in this example),
so that it starts flashing.
Press the INPUT button to copy the input signal,
and the REPRO button to copy the playback
signal.
The channel number input appears on the lower
source channel display.
Flashing
STEREO SOUND MEMORY/DIGITAL COPY
DIGITAL COPY
SOURCE
SOUND MEMORY
CH
MEM MEM
PLAY STOP
Chapter 5 Time Shift Editing Using the Sound Memory Function
SCROLL
CH
MODE
SET
DESTINATION
CH
FWD/REV
BEFORE AFTER
INVERT
START END
EDIT EDIT
Lit
SCROLL
CH
MODE
SET
DESTINATION
CH
FWD/REV
BEFORE AFTER
INVERT
MEM START END
REC EDIT EDIT
(Continued)
5-7