Correcting The Editing Points - Sony PCM-3348HR Operation Manual

9-4-2 Correcting the Editing Points

Correcting the recorder and player editing
points simultaneously
Use the following procedure to correct the recorder
and player editing points simultaneously.
1
Press and light the SLAVE button on the player
RM-3348HR.
2
Use the SF.mS/F.S button on the recorder RM-
3348HR to select 1 millisecond or 1 second as the
correction unit.
3
Holding down the IN or OUT button on the
recorder RM-3348HR, press the TRIM +/– buttons.
This corrects the editing IN or OUT point on the
recorder and player simultaneously.
Correcting the recorder and player editing
points individually
Use the following procedure to correct the recorder
and player editing points individually.
1
Press and extinguish the SLAVE button on the
player RM-3348HR.
2
Use the SF.mS/F.S button on the recorder or player
RM-3348HR to select 1 millisecond 1 second as
the correction unit.
3
Holding down the IN or OUT button on the
recorder or player RM-3348HR, press the TRIM
+/– buttons.
This corrects the recorder or player editing IN or
OUT point individually.
Moving the editing points forward or back
Editing point
Recorder
Moving the editing points forward or back
Moving the editing point forward
1
Press and light the SLAVE button on the player
RM-3348HR.
2
Holding down the IN button on the recorder RM-
3348HR, press the TRIM – button.
Moving the editing point back
1
Press and light the SLAVE button on the player
RM-3348HR.
2
Holding down the IN button on the recorder RM-
3348HR, press the TRIM + button.
Filling in a gap between editing points
This description takes as an example the case where
there is a 5 millisecond gap.
Use the following procedure to fill in the gap between
editing points.
Filling in with the recorder sound
1
Press and extinguish the SLAVE button on the
player RM-3348HR.
2
Holding down the IN button on the recorder RM-
3348HR, press the TRIM + button five times.
Filling in with the player sound
1
Press and extinguish the SLAVE button on the
Player
player RM-3348HR.
2
Holding down the IN button on the player RM-
3348HR, press the TRIM – button five times.
Recorder
Gap (5 msec.)
Recorder
Player
Filling in a gap between editing points
Chapter 9 Editing
Player
9-5