Rm-3348Hr - Sony PCM-3348HR Operation Manual

Location and Function of Parts
System control block
1 MASTER SAFE switch and lamp
1
M A S T E R l a m p a n d S A F E s w i t c h
When this switch is in the ON position, recording is
inhibited on all channels.
2
l a m p s M O D E a n d ( r e c o r d ) R E C s w i t c h
Select the recording mode from the following settings:
A D V A N C E R E C :
I N S E R T : Insert recording mode
A S S E M B L E :
3
W O R D L E N G T H l a m p s a n d s w i t c h
Select the word length for recording or playback.
4
m p s a n d s w i t c h f r e q u e n c y ) ( s a m p l i n g F s
Select the sampling frequency.
For details, see Section 2-4-3, "Selecting the Sampling
Frequency" (page 2-9).
5
l a m p s a n d s w i t c h E M P H ( e m p h a s i s )
For details, see Section 2-4-5, "Selecting the Emphasis"
(page 2-11).
6
l a m p s a n d I N P U T S E L E C T s w i t c h e s
For details, see Section 2-4-4, "Selecting the Input Signal"
(page 2-10).
A-4
Appendixes
2 REC MODE switch and lamps
3 WORD LENGTH switch and lamps
4 Fs switch and lamps
5 EMPH switch and lamps
REC WORD Fs EMPH
MODE LENGTH
ADVANCE
REC
INSERT 24BIT 44.056kHz OFF
16BIT 44.1kHz INDIVI
MASTER ASSEM
-BLE
SAFE
48kHz ON
MASTER
ON
SAFE
AUTO
SYNC
REC
OFF
Advance recording mode
assemble recording mode
6 INPUT SELECT switches and lamps
INPUT SELECT SYNC CLOCK TIME CODE
2CH-DIO READER GEN
ANALOG SDIF-2 ON INT X'tal 30/29(NDF) 30 INT
DIGITAL MADI OFF EXT NORM 29(DF) 29(NDF) EXT
INDIVI DI 25 29(DF) REGENE
(EXT)
REMOTE 3 24 25
VIDEO
24
!º TIME CODE selection switch and lamps
9 TIME CODE GEN format selection switch and lamps
8 TIME CODE READER lamps
7 SYNC CLOCK switch and lamps
System control block
7
S Y N C l a m p s C L O C K a n d s w i t c h
8
T I M E C O D E R E A D E R l a m p s
9
o n s e l e c t i f o r m a t T I M E C O D E ( g e n e r a t o r ) G E N
l a m p s a n d c h s w i t
!º
l a m p s a n d s w i t c h o n s e l e c t i T I M E C O D E
For details on the operation of these switches, see Section 3-
7-2, "Switches and Lamps Used for Time Code Recording
and Playback" (page 3-17).
!¡
S Y S T E M C O N T R O L l a m p s a n d s w i t c h
This selects the device used to control the PCM-
3348HR.
L C L / R E M O T E 1 , 3 , 4 :
Time code synchronizer connected to the EXT
PHASE CONTROL INPUT connector, EXT
SPEED CONTROL INPUT connector, or
REMOTE-1 connector.
RM-3348HR remote control unit connected to the
REMOTE-3 connector.
Mixing console connected to the AUX connector,
REC RDY CONTROL 1, 2, 3 or 4 connector.
Video editing control system connected to the
REMOTE-2 connector.
REMOTE 2:
to the REMOTE-2 connector
SYSTEM
CONTROL
1,3,4
LCL/REMOTE
REMOTE 2
!¡ SYSTEM CONTROL switch and lamps
PCM-3348HR.
Video editing control system connected