Sony PCM-3348HR Operation Manual page 163

10-2-4 Synchronization with a
Digital VTR
Example synchronization signal
connections (1)
This example illustrates connection to a D-1 or D-2
format digital VTR, using a composite video signal for
synchronization, and inputting and outputting AES/
EBU format digital audio signals.
Composite video signal
VIDEO REF
INPUT
DIGITAL I/O
AUDIO CH-1/2,
CH-3/4
OUTPUT
Digital VTR
AES/EBU format
(D1 or D2
digital audio signals
format)
DIGITAL I/O
AUDIO CH-1/2,
CH-3/4
INPUT
Example configuration (1) for synchronization with a digital VTR
Notes on system configuration
• This system can only use a sampling frequency of
48.0 kHz.
• In the SETUP menu for the digital VTR, select
DIGITAL for the audio input, and select channels 1/2
or 3/4 for the input.
For details of operation of the digital VTR, refer to the
Operation Manual for the digital VTR.
REFERENCE
VIDEO
INPUT
PCM-3348HR
AES/EBU
D-I
INPUT SELECT
switch: 2CH DI
Fs switch:
48.0 kHz
AES/EBU
SYNC CLOCK
D-O
switch: VIDEO
CTK board REF
VIDEO switch:
NORM
REMOTE-3
TAPE
RECORDER
RM-3348HR
Example synchronization signal
connections (2)
This example illustrates connection to a D-1 or D-2
format digital VTR, using AES/EBU format
synchronization signals for synchronization.
Composite video signal
VIDEO REF
INPUT
DIGITAL I/O
AUDIO CH-1/2,
CH-3/4
OUTPUT
Digital VTR
AES/EBU format
(D1 or D2
digital audio signals
format)
DIGITAL I/O
AUDIO CH-1/2,
CH-3/4
INPUT
Example configuration (2) for synchronization with a digital VTR
Notes on system configuration
• This system can only use a sampling frequency of
48.0 kHz.
• In the SETUP menu for the digital VTR, select
DIGITAL for the audio input, and select channels 1/2
or 3/4 for the input.
For details of operation of the digital VTR, refer to the
Operation Manual for the VTR.
Chapter 10
PCM-3348HR
AES/EBU
D-I
INPUT SELECT
switch: 2CH DI
Fs switch:
AES/EBU
D-O
48.0 kHz
SYNC CLOCK
switch: DI
REMOTE-3
TAPE
RECORDER
RM-3348HR
10-7
External Synchronization