Sony PCM-3348HR Operation Manual page 238

Location and Function of Parts
System control block
a
REMOTE1,3,4 REMOTE2 24BIT
/LOCAL
SYSTEM
CONTROL
POWER
Ø /ø
POWER switch and lamp
1
S Y S T E M C O N T R O L s w i t c h
This has the same effect as the SYSTEM CONTROL
switch on the PCM-3348HR.
For details, see "System control block" (page A-4) in the
section "PCM-3348HR."
2
l a m p s s t a t u s u n i t M a i n
These indicate the operating state of the PCM-
3348HR.
a R E M O T E / L O C A L l
a m p s
These indicate which devices are able to control the
PCM-3348HR.
R E M O T E 1 , 3 , 4 / L O C A L :
3348HR, devices connected to the REMOTE-1, the
EXT SPEED CONTROL INPUT connector or the
EXT PHASE CONTROL INPUT connector,
devices connected to the AUX connector or the
REC RDY CONTROL 1/2 connectors, or video
editor connected to the REMOTE-2 connector.
REMOTE 2:
2 connector.
b W O R D L E N G T H l
a m p s
These indicate the number of bits for the word length.
A-30
Appendixes
b c
WORD
SAMPLING FREQ
LENGTH
16BIT 44.056KHz 44.1KHz 48.0KHz
1 SYSTEM CONTROL switch
PCM-3348HR, RM-
video editor connected to the REMOTE-
2 Main unit status lamps
d e
MASTER
REC MODE
SAFE
ADVANCE ASSEMBLE INSERT INT EXT
SYNC REC
REC
System control block
c
S A M P L I N G l a m p s F R E Q ( f r e q u e n c y )
These indicate the sampling frequency.
l i t : 4 4 . 0 5 6
l i t : 4 4 . 1
4 4 . 1 f l a s h i n g :
0.1% reduction from 44.1 kHz
l i t : 4 8 . 0
4 8 . 0 f l a s h i n g :
48.0 kHz
d M A S T E R S A F E l
a m p
Remains lit when all channels are in the recording
inhibited state (master safe).
e
M O D E R E C ( r e c o r d ) l a m p s
These indicate the currently selected recording mode.
A D V A N C E R E C l i t :
A S S E M B L E l i t :
I N S E R T l i t :
f g h
EXT CLOCK EMPHASIS
SYNC CLOCK
ERROR MISMATCH
DI REMOTES VIDEO WARNING
44.056 kHz
44.1kHz
Fs (sampling frequency) shift mode,
48.0 kHz
Fs shift mode, 0.1% reduction from
Advance recording mode
Assemble recording mode
Insert recording mode
i
SYSTEM
ALARM