Sony PCM-3348HR Operation Manual page 213

Channel status setting block
1 SET button
AUTO INPUT button
1
b u t t o n S E T
To set all digital audio channels, two analog channels,
or time code channel to the recording ready state, hold
down this button and press the ALL CHANNEL REC
READY button, A1 A2 REC READY button, or
TIME CODE REC READY button.
For details on the operation of the other buttons, see the
following sections:
Section 3-1, "Channel Settings" (page 3-1)
Section 3-4, "Advance Recording" (page 3-6)
Section 3-5-2, "Assemble Recording Operation" (page 3-
12)
For analog audio channel (A1 A2) buttons, see Section
3-6-2, "Analog Audio Channel Recording" (page 3-14).
For the time code related buttons, see Section 3-7, "Time
Code Channel Recording and Playback" (page 3-16).
For the ALL CHANNEL REC MUTE button, see "Setting all
digital audio channels to the muting signal recording state"
(page 3-2).
For the AUTO INPUT button, see "Switching the monitor
output automatically depending on the tape transport state"
(page 3-2).
ALL CHANNEL REC MUTE button
ALL CHANNEL REC READY button
SET ALL CHANNEL TIME CODE
REC REC
MUTE READY
REPRO
AUTO INPUT
INPUT
TIME CODE REPRO button
ALL CHANNEL INPUT button
ALL CHANNEL REPRO button
Channel status setting block
TIME CODE REC READY button
A1 A2
A1 A2 REC READY button
A1 A2 REPRO button
ANALOG MONITOR button
ANALOG
MONITOR
TIME CODE INPUT button
A-5
Appendixes