Sony PCM-3348HR Operation Manual page 228

Location and Function of Parts
MC board
1 SELECT switches
OFF ON
BACK UP 1
2
AUTO REC
DIO NO DLY 3
VARI SYNC 4
TEST
2 TEST switch
TIME CODE
TC GEN
3 TC GEN switch
REC FREE
RUN RUN
OUTPUT
4 OUTPUT switch
NORM ADV
PB TC GAIN
5 PB TC GAIN switch
NORM LOW
MC
S601
6 Bit switches
MC board
1
S E L E C T s w i t c h e s
N o . 1 ( B A C K U P ) : Switches the PCM-3348HR
memory backup function on and off.
For details, see Section 2-6, "Memory Backup Function"
(page 2-18).
N o . 2 ( A U T O R E C ) : Switches the automatic
recording mode for the analog audio channels on and
off.
For details, see "Automatic recording of analog audio
channels" (page 3-14).
( D I O N O D L Y ) : N o . 3
connect the OXF-R3 mixing console using the input/
output connectors of the MADI board.
ON: To connect the OXF-R3
OFF: Not to connect the OXF-R3
A-20
Appendixes
s w i t c h
s w i t c h G A I N
Determines whether to
N o . 4 ( V A R I S Y N C ) :
on and off.
For details, see Section 3-7-8, "Time Code Sync Playback"
(page 3-25).
2
s w i t c h T E S T
For maintenance purposes only. Do not touch.
3
g e n e r a t o r ) c o d e ( t i m e G E N T C
4
O U T P U T s w i t c h
5
c o d e ) t i m e ( p l a y b a c k T C P B
For details of the operation of these switches, see "MC
board" (page 3-19).
6
( S 6 0 1 ) s w i t c h e s B i t
Select the operation mode. All the switches are set to
the left positions at the factory.
N o . 1 ( A U T O A S M ) :
mode during assemble recording.
R i g h t : Forced assemble recording
L e f t : Automatic assemble recording
For details, see Section 3-5-1, "What Is Assembling
Recording?" (page 3-10).
N o . 2 ( C T L P R O ) :
function ON (left) and OFF (right).
No. 3 (MODE):
the simultaneous playback function for recording
on a prestriped tape.
N o . 4 ( B L C H K ) :
(Factory-setting: OFF)
No. 5 (HEAD):
(Factory-setting: OFF)
N o . 6 ( P H A S E ) :
generator phase correction function ON (left) and
OFF (right).
No. 7: For test purposes. Do not touch. (Factory-
setting: OFF)
N o . 8 ( E R R S L ) :
display does (ON) or does not (OFF) display
warning codes when the SYSTEM WARNING
lamp is lit. (Factory-setting: OFF)
Switches the vari sync function
Determines the CTL recording,
Switches the CTL protection
Switches ON (right) and OFF (left)
For test purposes. Do not touch.
For test purposes. Do not touch.
Switches the internal time code
Determines whether the tape time