Sony PCM-3348HR Operation Manual page 96

5-4 Preparations for Time Shift Editing
5-4-4 Selecting the Sound
Memory Playback Direction
Use the following procedure to select whether to use
the forward direction or reverse direction for sound
memory playback.
1
Check that the SOUND MEMORY button is lit,
then press the MEM STOP button to select the
memory stop mode.
The MEM PLAY, MEM REC, START EDIT and
END EDIT lamps all go off, and the channel
display appears as shown below.
Flashing
STEREO SOUND MEMORY/DIGITAL COPY
DIGITAL COPY
SOURCE
SOUND MEMORY
CH
MEM MEM
PLAY STOP
MEM STOP button
2
Press the MODE button and INVERT button
simultaneously to toggle the playback direction.
The lower destination channel display shows the
mode selected, using the following codes.
• rU: reverse
• Sd: forward
Playback direction
(Displayed for 2
STEREO SOUND MEMORY/DIGITAL COPY
DIGITAL COPY
SOURCE DESTINATION
SOUND MEMORY
CH CH
MEM MEM MEM
PLAY STOP REC
5-10
Chapter 5 Time Shift Editing Using the Sound Memory
Lit
SCROLL
CH
MODE
SET
DESTINATION
CH
FWD/REV
BEFORE AFTER
INVERT
MEM START END
REC EDIT EDIT
INVERT
button
MODE
button
seconds)
SCROLL
CH
MODE
SET
FWD/REV
BEFORE AFTER
INVERT
START END
EDIT EDIT
To change the playback direction while
setting the channels
Press the MODE button and INVERT button
simultaneously.
The playback direction is then displayed as shown
below.
• While setting the source channel
Playback direction
STEREO SOUND MEMORY/DIGITAL COPY
DIGITAL COPY
SOURCE DESTINATION
SOUND MEMORY
CH
MEM MEM MEM
PLAY STOP REC
• While setting the destination channel
Playback direction
STEREO SOUND MEMORY/DIGITAL COPY
DIGITAL COPY
SOURCE
SOUND MEMORY
CH
MEM MEM
PLAY STOP
INVERT button
MODE button
SCROLL
CH
MODE
SET
CH
FWD/REV
BEFORE AFTER
INVERT
START END
EDIT EDIT
INVERT button
MODE button
SCROLL
CH
MODE
SET
DESTINATION
CH
FWD/REV
BEFORE AFTER
INVERT
MEM START END
REC EDIT EDIT