Sony PCM-3348HR Operation Manual page 232

Location and Function of Parts
3
o u t p u t r m o n i t o s i g n a l P l a y b a c k
For playback signal monitoring, this switch determines
the analog audio output signal and the signal output to
the headphones.
PWM: Plays back a signal PWM recorded to the
analog audio tracks.
Use this setting when playing back a tape recorded
on this unit or the PCM-3324S.
BIAS: Plays back a signal bias recorded to the analog
audio tracks.
Use this setting when playing back a tape recorded
on the PCM-3324A/3324.
4
C O M P A N D E R s w i t c h
Switches on and off the compander function,
compressing while recording the analog audio signal
and expanding during playback.
OFF: Disables the compander function. Use this
setting when recording and playing back signals
other than audio signals.
NORM: Enables the compander function. Use this
setting when recording and playing back audio
signals.
5
O U T P U T A D V / N O R M ( a d v a n c e / n o r m a l ) s w i t c h
When outputting an analog audio channel playback
signal, this switch determines whether or not to
provide a delay.
ADV: Output the signal with no delay.
NORM: Output with a delay equal to the delay on the
digital audio tracks (normal setting).
6
P H O N E S c o n t r o l L E V E L v o l u m e ) ( h e a d p h o n e s
Adjusts the volume of the headphones for monitoring
analog audio channels A1 and A2.
7
P H O N E S j a c k ( h e a d p h o n e s )
Connect the headphones for monitoring analog audio
channels A1 and A2.
8
s w i t c h S W 5 0 1
This switch is for factory adjustment only. Do not
change the setting (NORM).
A-24
Appendixes
MEM board
TRG
TRIGGER
RETRG SINGLE
INPUT LEVEL
– +
TRG INPUT
MEM
1
l a m p ( t r i g g e r ) T R G
Lights when the external trigger signal to be input via
the TRG INPUT connector exceeds the level set with
the TRG INPUT LEVEL control.
2
T R I G G E R s w i t c h
Sets the external trigger mode for the sound memory.
R E T R G ( r e t r i g g e r ) :
S I N G L E : Retrigger inhibit mode
For details, see "5-6 External Trigger Mode" (page 5-12).
3
I N P U T L E V E L c o n t r o l ( t r i g g e r ) T R G
Adjusts the input level of the external trigger signal for
the sound memory.
A d j u s t m e n t r a n g e :
For details, see "5-6-3 Inputting a Trigger Signal to the
RM-3348HR" (page 5-13).
4
j a c k ) ( P h o n e I N P U T c o n n e c t o r ( t r i g g e r ) T R G
Accepts an external trigger signal for the sound
memory.
1 TRG lamp
2 TRIGGER switch
3 TRG INPUT LEVEL control
4 TRG INPUT connector
MEM board
Retrigger mode
+4 dBs to –16 dBs