Connecting The Power Supply - Sony PCM-3348HR Operation Manual

2-1 Basic Connections

2-1-4 Connecting the Power Supply

Use the following procedure to connect the power
supply.
PCM-3348HR
Note
Always use the unit with an independent power outlet
rated at least 15 A where supply voltage is 120 V
(USA and Canada) and 8 A where it is 220 V to 240 V
(Other countries).
DIGITAL AUDIO CHANNEL LINEOUTPUT
Breaker
AC IN connector
1
Check that the breaker is off.
2
Connect the supplied AC power cord for the PCM-
3348HR to the AC IN connector and fasten the
clamps.
3
Plug the AC power cord into an AC outlet.
4
Turn the breaker on.
2-6
Chapter 2 Preparations
DIGITAL I/O REMOTE CONTROL
DIGITAL AUDIO CHANNEL LINE INPUT
INPUT ANALOG TIME CODE SECTOR SECTOR WORD SYNC
ADDRESS SYNC
OUTPUT
METER REFERENCE VIDEO GROUND
y
RM-3348HR
1
Connect the supplied AC power cord for the RM-
3348HR to the AC IN connector.
2
Plug the AC power cord into an AC outlet.
Attaching the plug holder
When connecting the cords to the AC IN connectors,
attach the plug holders as shown below.
⁄ A C IN
AC IN connector
⁄AC IN
y
Plug holder