Adjusting The Editing Points - Sony PCM-3348HR Operation Manual

5-10-5 Adjusting the Editing
Points
Before carrying out the adjustment, use the procedure
in step 1 of Section 5-10-4, "Carrying Out Rehearsal
Time Shift Editing" to select the auto start mode.
Adjusting the punch-in point
Use the following procedure to adjust the punch-in
point.
1
Press and light the REPRO button for the
destination channel.
2
Press the AUTO PUNCH button.
The rehearsal begins. If required, correct the
punch-in point using the procedure described in
Section 4-4-3, "Correcting the Punch-In/Out
Points" on page 4-16.
3
Press the RECALL, IN, STORE and MEM PLAY
buttons in that order.
This saves the adjusted punch-in point as the sound
memory playback start point (in the PS register).
Adjusting the punch-out point
Use the following procedure to adjust the punch-out
point.
1
Press the MEM PLAY button.
The MEM PLAY lamp flashes, and the RM-
3348HR enters the sound memory playback
standby state.
2
Press and light the REPRO button for the
destination channel.
3
Press and light the REPRO MUTE button.
4
Press the AUTO PUNCH button.
This carries out a sound memory playback
rehearsal between the punch-in point and punch-
out point on the destination channel.
If required, correct the punch-out point using the
procedure described in Section 4-4-3, "Correcting
the Punch-In/Out Points" on page 4-16.
5
After adjusting the punch-out point, press the
REPRO MUTE button, turning it off.
Chapter 5 Time Shift Editing Using the Sound Memory Function
5-25