Chapter 11 System Configuration; Remote Control Connectors And Peripheral Equipment; Remote Control Connectors - Sony PCM-3348HR Operation Manual

11-1 Remote Control Connectors and Peripheral
Equipment

11-1-1 Remote Control Connectors

PCM-3348HR remote control connectors
The following remote control connectors are provided
on the PCM-3348HR rear panel.
1 AUX connector
2 REMOTE-3 connector
3 REMOTE-2 connector
D-I
D-I
D-I
D-I
CH1-CH8
CH1-CH8
1
c o n n e c t o r a r y ) ( a u x i l i A U X
Connecting a mixing console with a channel recording
ready control (channel REC READY) function to this
connector allows you to switch the PCM-3348HR time
code channel and analog audio channels A1 and A2
between the recording enabled (REC READY) and
recording inhibited (SAFE) states from the mixing
console.
2
R E M O T E - 3 c o n n e c t o r
Connect an RM-3348HR Remote Control Unit.
3
R E M O T E - 2 c o n n e c t o r
Connect a video editing control unit.
4
S P E E D E X T ( e x t e r n a l ) C O N T R O L I N P U T
r c t o c o n n e
Supplying from –10 V to +10 V DC to this connector
allows you to continuously vary the tape transport
speed by from –16 m/s to +16 m/s.
AES/EBU SDIF-2(BALANCE)
INPUT OUTPUT
D-O
SDIF-2(BALANCE)
AES/EBU
INPUT OUTPUT
D-O
AES/EBU MADI REMOTE-2(8PIN)
INPUT OUTPUT
D-O
SRIF-3
AES/EBU
SOUND
MEMORY
D-O
TRIGGER
INPUT
DIGITAL I/O
DIGITAL AUDIO CHANNEL LINE INPUT
CH9-CH16 CH17-CH24 CH25-CH32 CH33-CH40 CH41-CH48
DIGITAL AUDIO CHANNEL LINEOUTPUT
CH9-CH16 CH17-CH24 CH25-CH32 CH33-CH40 CH41-CH48
PCM-3348HR remote control connectors
4 EXT SPEED CONTROL INPUT connector
5 EXT PHASE CONTROL INPUT connector
6 REMOTE-1 connector
7 REC RDY CONTROL connectors
EXT
SRIF-1
SERVO
CONTROL REMOTE-1
INPUT
SPEED PHASE
SRIF-4
AUX
REC RDY CONTROL-1 REC RDY CONTROL-2
REC RDY CONTROL-3 REC RDY CONTROL-4
REMOTE-3
REMOTE CONTROL
ANALOG TIME CODE SECTOR SECTOR WORD SYNC
ADDRESS SYNC
A1 INPUT A2 INPUT
INPUT INPUT INPUT
OFF ON
75
A1 OUTPUT A2 OUTPUT
OUTPUT OUTPUT OUTPUT
METER REFERENCE VIDEO GROUND
INPUT
y
OFF ON
75
8 METER connector
5
P H A S E E X T ( e x t e r n a l ) C O N T R O L I N P U T
r c t o c o n n e
Supplying from –10 V to +10 V DC to this connector
allows you to continuously vary the playback speed.
The relationship between the voltage applied and the
variation in the speed is as follows.
Voltage applied and the playback speed variation
DC voltage
VARI SYNC switch: ON VARI SYNC switch: OFF
–10.0 V
–2.5 V
0 V
+2.5 V
+10.0 V
6
R E M O T E - 1 c o n n e c t o r
Connect a time code synchronizer to this connector to
control the tape transport speed.
Change in playback speed
–12.5% –50.0%
–12.5% –12.5%
0% 0%
+12.5% +12.5%
+12.5% +50.0%

Chapter 11 System Configuration

11-1