Sony PCM-3348HR Operation Manual page 176

Digital audio recorder
Hide thumbs Also See for PCM-3348HR:
Table of Contents

Advertisement

11-1 Remote Control Connectors and Peripheral Equipment
11-1-3 Rehearsal Control Using a
Synchronizer
It is possible to carry out rehearsal control, using a
synchronizer connected to the REMOTE-1 connector
on the PCM-3348HR.
For details of the pin assignments of the REMOTE-1
connector, see Appendix (A-16).
Rehearsal control signals and rehearsal
execution
Rehearsal command signal and rehearsal tally
signal
The rehearsal command signal (REH.CMD)
corresponds to pressing the REH button. When the
PCM-3348HR receives an REH command and PLAY
command simultaneously, the REH and PLAY buttons
on the RM-3348HR light, and a rehearsal is carried
out.
Punch in
REH.CMD
(pin No. 32)
PLAY.CMD
(pin No. 37)
REH.TLY
(pin No. 6)
Rehearsal operation
Rehearsal command signal and rehearsal tally signal
11-4
Chapter 11 System Configuration
Rehearsal status command signal and
rehearsal tally signal
The rehearsal status command signal (REH-ST.CMD)
corresponds to the rehearsal status output of the
synchronizer.
Connect the rehearsal status output of the
synchronizer to pin No. 20 of the PCM-3348HR
REMOTE-1 connector. The rehearsal status
command signal is active between the punch in point
and punch out point while a synchronizer rehearsal
operations being carried out.
To send REC and PLAY commands from the
synchronizer, set the synchronizer event control
function so that the REC command
the punch in point, and the PLAY command
the punch out point.
If the PCM-3348HR receives a REC command while
the rehearsal status command signal is active, the
REH and PLAY buttons on the RM-3348HR light,
and a rehearsal is carried out.
If the PCM-3348HR receives a PLAY command
while the rehearsal status command signal is active,
the REH button on the RM-3348HR
punch out is carried out.
Punch out
REH-ST.CMD
(pin No. 20)
(pin No. 36)
(pin No. 37)
Punch in
a
REC.CMD
b
b – a > 0
PLAY.CMD
REH.TLY
(pin No. 6)
Rehearsal operation
Rehearsal status command signal and other signals
signal is output at
signal at
goes off, and a
Punch out

Advertisement

Table of Contents
loading

Table of Contents