Sony PCM-3348HR Operation Manual page 215

Tape transport operation block
1
Z E R O L O C A T E b u t t o n
Used to search for the "0
current tape time display mode.
2
L O C A T E b u t t o n
Used to search for the cue point displayed on the
LOCATE TIME display.
3 0 R E W
b u t t o n ( r e w i n d )
Rewinds the tape.
When this button is pressed during recording, the
recording can be ended with cross-fading. For slower
rewinding, press this button simultaneously with the
PLAY button, and the tape will be rewound at twice
the normal playback speed.
4 ) F F
b u t t o n f o r w a r d ) ( f a s t
Fast-forwards the tape.
When this button is pressed during recording, the
recording can be ended with cross-fading. For slower
fast-forwarding, press this button simultaneously with
the PLAY button, and the tape will be fast-forwarded
at twice the normal playback speed.
5 ( P L A Y
b u t t o n
Plays the tape back.
To start recording, press this button and the REC
button simultaneously. When this button is pressed
during recording, recording ends with cross-fading.
1 ZERO LOCATE button
2 LOCATE button
3 0REW button
4 )FF button
SLOW WIND
º ‚
ZERO
LOCATE LOCATE REW FF
Tape transport operation block
00 00 " point of the
H MIN SEC
5 (PLAY button
· π ®
EDIT
PLAY STOP REC STOP
8 EDIT STOP button
7 rREC button
6 pSTOP button
6 p S T O P
b u t t o n
Stops the tape.
When this button is pressed during recording,
recording stops. When a tape is unloaded and this
button is pressed, the tension arms are activated to load
the tape.
7 r R E C
b u t t o n ( r e c o r d )
To start recording, press this button and the PLAY
button simultaneously.
8
S T O P E D I T b u t t o n
When this button is pressed during playback, the tape
runs in the playback mode for 5 seconds more, then
returns to the point where the button was pressed and
stops. This button is useful for searching for an edit
point when the analog audio tracks are set to the
automatic recording (AUTO REC) mode. Analog
audio track recording continues for 5 seconds.
9
S H U T T L E c o n t r o l
This controls the tape running direction and speed in
the STOP mode. Turning the control to the right
winds the tape forward and turning the control to the
left winds the tape backward. The tape speed can be
controlled within a range of
SHUTTLE
9 SHUTTLE control
1
/ to 5 times normal.
10
A-7
Appendixes