Sony PCM-3348HR Operation Manual page 200

11-3 Example System Configurations
Notes on Operation
• For the DMC control from the editing control unit
with the speed setting between +88 and +112, the
PCM-3348HR carries out the vari-speed operation.
For the speed other than above, the PCM-3348HR
carries out the shuttle operation.
• When the PCM-3348HR vari-sync switch is set to
OFF, DMC control is disabled.
• When a working tape is replaced, run the tape in play
mode to read the time code until the TIME CODE
READER lamp lights. Then start editing.
• Once the power of the PCM-3348HR is turned off,
wait for more than 10 seconds to turn the unit on
again.
11-28
Chapter 11 System Configuration