Selecting The Editor Mode - Sony PCM-3348HR Operation Manual

9-3 Selecting the Editor Mode

1
On the master and slave RM-3348HR units, press
the 1, STORE, = and 0 buttons in that order.
The indication "Editor" appears in the LOCATE
TIME display.
TAPE TIME
CTL
TIME CODE
H
RELATIVE
LOCATE TIME
ABSOLUTE
TIMER
H
2
Press the ↑ button.
This selects the editor mode, and the indication
"Ed" appears in the upper CUE display.
The SYNC CLOCK switch of the slave PCM-
3348HR unit automatically switches to REMOTE 3.
TAPE TIME
CTL
TIME CODE
H
RELATIVE
LOCATE TIME
ABSOLUTE
TIMER
H
While the editor mode is selected, the indication "Ed"
remains in the upper CUE display. Only the lower
CUE display is used for repeat playback indication.
Note
If you press and light the SLAVE button on the RM-
3348HR connected to the player, before selecting the
editor mode on the player, the editor mode will not
operate correctly.
Abandoning the selection of editor mode
In step 2 above, instead of pressing the ↑ button, press
the CLEAR button.
CUE
DF
MIN SEC
CUE
MIN SEC FRAME mSEC SF
CUE
DF
MIN SEC
CUE
MIN SEC FRAME mSEC SF
9-3
Chapter 9 Editing