Sony PCM-3348HR Operation Manual page 183

Switch settings
PCM-3348HR settings
Switch Master unit
REC MODE INSERT
SYNC CLOCK INT
Fs Set Automatically
RM-3348HR settings
Switch Master unit
SELECTOR switch ON (MASTER)
No.2 (lower)
SELECTOR switch No.4: OFF
No.4 to 8 (lower) No.5: OFF
No.6: OFF
No.7: OFF
No.8: OFF
Device address:
00H
SLAVE button OFF
Timer display CTL ABSOLUTE or CTL ABSOLUTE or
mode CTL RELATIVE
Notes on operation
•
Use cables with BNC connectors to connect the word
sync, sector sync and sector address signals.
• The two PCM-3348HR units must have the same
sampling frequency.
• Use a prestriped tape and carry out insert recording.
• The tape on the slave unit must be prestriped with the
same sampling frequency as the master unit.
Slave unit
INSERT
Set automaticaly
Set the same as the
master unit
Slave unit
OFF (SLAVE)
No.4: OFF
No.5: OFF
No.6: OFF
No.7: OFF
No.8: ON
Device address:
01H
ON
CTL RELATIVE
Chapter 11 System Configuration
11-11