Obtaining A Desired Equalizer Curve; To Adjust Right And Left Channels Independently - Sony SEQ-711 Operating Instructions Manual

Obtaining a Desired Equalizer Curve
You can adjust the level of 7 frequency bands for both channels.
4 Press A or V, to adjust the level of the
1/FLAT 2, 3, 4 frequency range.
1 REVERSE DSC
1 Press EFFECT so that the indicator lights up.
vie
oer After the adjustment is completed
Approximately 5 seconds after the adjustment is completed,
wa the display returns to the sound level display. However, as
long as the EFFECT indicator is lit, you can listen to the
adjusted sound.
When a frequency range stops blinking
2 You cannot adjust the channels. Repeat from step 1.
Press one of the CURSOR CONTROL buttons.
When the EFFECT indicator is not lit
You can adjust sound, but cannot listen to the adjusted
sound.
(m To Adjust Right and Left Channels Independently
1 Press EFFECT.
2 Press CURSOR MODE LEFT to adjust the left channel. The
Boone Wenn. | frequency range on the left channel blinks.
Press CURSOR MODE RIGHT to adjust the right channel.
The frequency range on the right channel blinks.
3 Adjust the desired frequency ranges with the CURSOR
3 Press <] or >, so that the frequency range CONTROL buttons while it is blinking.
you wish to adjust blinks.
To return to the mode for adjusting both channels
together
Press CURSOR MODE L + R.