Sony PFV-L10 Installation Manual

Interface unit
Hide thumbs Also See for PFV-L10:

Advertisement

Quick Links

INTERFACE UNIT
PFV-L10
INSTALLATION MANUAL
2nd Edition (Revised 1)
Serial No. 17001 and Higher

Advertisement

Table of Contents
loading

Summary of Contents for Sony PFV-L10

  • Page 1 INTERFACE UNIT PFV-L10 INSTALLATION MANUAL 2nd Edition (Revised 1) Serial No. 17001 and Higher...
  • Page 2 4. Prevention against achieving hazardous condition due to uneven mechanical loading When this product is installed in a rack, please make sure that the rack does not achieve hazardous condition due to uneven mechanical loading. PFV-L10...
  • Page 3: Table Of Contents

    Installing Optional Board ............... 1-4(E) 1-6. Rack Mounting ..................1-6(E) 1-6-1. Notes on Rack Mounting ............1-6(E) 1-6-2. Rack Mounting Procedure ............. 1-7(E) 1-7. Matching Connector ................1-8(E) 1-8. Signal Inputs/Outputs ................1-8(E) 1-9. Optional Accessories ................1-8(E) 1 (E) PFV-L10...
  • Page 5: Manual Structure

    Manual Structure Purpose of this manual This manual is the installation manual of Interface Unit PFV-L10. This manual is intended for use by trained system and service engineers, and describes the information for installation of the unit. Contents This manual is organized by following sections.
  • Page 6: Related Manuals

    This manual describes the notes on operating, the locations and functions of parts, and controls of PFV-L10. • Maintenance Manual (Available on request) This manual describes the information for periodic maintenance and detailed service. If this manual is required, please contact your local Sony Sales Office/Service Center. 4 (E) PFV-L10...
  • Page 7: Installation

    Section 1 Installation 1-1. Installation Procedure 1-2. Operating Environment 5 dC to 40 dC The installation procedure of PFV-L10 is as shown in the Operating temperature 10 dC to 35 dC following flowchart. Performance temperature Refer to the each item in this manual for details.
  • Page 8: Power Supply

    1-3. Power Supply 1-3-2. Recommended Power Cord 1-3-1. Power Supply Specifications This unit does not come with a power cord. To get a power cord, please contact your local Sony Sales Power voltage AC 100 V to 240 V Office/Service Center.
  • Page 9: Installation Space

    Do not block the ventilation holes of the unit. Both of the front and rear sides must be at least 20 cm away from the walls for ventilation and mainte- nance. The outer dimensions of PFV-L10 are as shown here: 15.3 3-M4...
  • Page 10: Installing Optional Board

    1 , securely connect it to the MB-862 board by pushing. Installing Main Board (Front side) 1. Turn off the power switches A and B of PFV-L10. 2. Remove the front panel after loosening the two screws MB-862 board on the panel.
  • Page 11 3. Secure the connector panel with the two screws securing the blank panel. B 2.6x4 Connector panel Do not open the slot for an air-cooled effect of this unit. Attach the blank panel to a empty slot. 1-5 (E) PFV-L10...
  • Page 12: Rack Mounting

    Mount PFV-L10 on the rack properly in the procedure below using a specified rack mounting kit. Specified rack mounting kit: RMM-10 PFV-L10 may not be able to be mounted on a 19-inch standard rack using a rack mounting kit other than the specified one.
  • Page 13: Rack Mounting Procedure

    6. Fix the unit to the rack with the specified screws and ornamental washers. Rail portion B 4x6 (Length adjustment Ornamental washer screws) RK 5x16 The maximum depth of an adaptor is 750 mm. Ornamental washer The minimum depth of an adaptor is 595 mm. RK 5x16 1-7 (E) PFV-L10...
  • Page 14: Matching Connector

    When external cables are connected to the STATUS OUT connector on the connector panel during installation and maintenance, the hardware listed below (or the equivalents) must be used at the end of cable. PFV-L10 Side Connector Matching Connector Print on Panel...
  • Page 15 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any...
  • Page 16 Printed in Japan Sony Corporation PFV-L10 (SY) J, E 2004. 12 22 B&P Company 3-202-581-12 ©2002...

Table of Contents