Sony PCM-3348HR Operation Manual page 154

9-4 Setting Editing Points
Removing an overlap between editing
points
This description takes as an example the case where
there is a 5 millisecond overlap.
Recorder
Player
Removing an overlap between editing points
Use the following procedure to remove an overlap
between editing points.
Cutting the recorder sound
1
Press and extinguish the SLAVE button on the
player RM-3348HR.
2
Holding down the IN button on the recorder RM-
3348HR, press the TRIM – button five times.
Cutting the player sound
1
Press and extinguish the SLAVE button on the
player RM-3348HR.
2
Holding down the IN button on the player RM-
3348HR, press the TRIM + button five times.
9-6
Chapter 9 Editing
Recorder
Overlap (5 msec)
Player