Sony PCM-3348HR Operation Manual page 60

4-1 Audio Control
Using the MONITOR MODE CONTROL buttons
S
REC MUTE
REC
1
REC
READY
REPRO
INPUT
1
ALL REPRO button
Press and light the ALL REPRO button to set all
digital audio channels to the playback signal
monitoring state. Unless in the ALL MUTE or
REPRO MUTE state, the REPRO buttons for all
digital audio channels light.
This state ends and the ALL REPRO button goes off in
the following cases. The channels normally revert to
their individual settings.
•
When the AUTO INPUT button is pressed.
•
When the ALL INPUT button is pressed.
•
When the INDIVIDUAL button is pressed.
•
When the REPRO button or INPUT button for a
channel is pressed.
•
When the tape transport state automatically changes
while the AUTO INPUT button is lit.
•
When the channel settings are retrieved using one of
the SET UP MEMORY buttons A to D.
4-6
Chapter 4 Basic Operations of the RM-3348HR Remote Control Unit
SET UP MEMORY
REHEARSAL 2CH DIO RECALL
(REC DISABLE) SET UP ENABLE A B C
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Using the MONITOR MODE CONTROL buttons
INDIVIDUAL button
ALL REPRO button
ALL INPUT button
DIGITAL AUDIO REMOTE CONTROL UNIT RM-3348HR
MONITOR MODE CONTROL
ALL ALL ALL REPRO AUTO
D STORE INDIVIDUAL REPRO INPUT MUTE MUTE INPUT
17 18 19 20 21 22 23 24
17 18 19 20 21 22 23 24
ALL INPUT button
Press and light the ALL INPUT button to set all digital
audio channels to the input signal monitoring state.
Unless in the ALL MUTE state, the INPUT buttons for
all digital audio channels light.
This state ends and the ALL INPUT button goes off in
the following cases. The channels normally revert to
their individual settings.
•
When the AUTO INPUT button is pressed.
•
When the ALL REPRO button is pressed.
•
When the INDIVIDUAL button is pressed.
•
When the REPRO button or INPUT button for a
channel is pressed.
•
When the tape transport state automatically changes
while the AUTO INPUT button is lit.
•
When the channel settings are retrieved using one of
the SET UP MEMORY buttons A to D.
Reverting to the individual settings
To return to the previous individual settings for the
channels when the ALL REPRO or ALL INPUT
button is lit, press the INDIVIDUAL button.
X'FADE TIME
X'FADE
EXT
OUTPUT
CONTROLLED
AUTO REC REC
TIME
A1 A2
CODE
REC
READY
REPRO
INPUT
A1 A2
TIME
CODE
ANALOG
MONITOR