Displaying The Snmp Settings - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

Step
3. (Optional.) Configure a
source
notifications.
4. (Optional.)
extended
linkUp/linkDown
notifications.
5. (Optional.)
the notification queue
size.
6. (Optional.)
the notification lifetime.

Displaying the SNMP settings

Execute display commands in any view. The display snmp-agent community command is
supported only in non-FIPS mode.
Task
Display SNMP agent system information, including
the contact, physical location, and SNMP version.
Display SNMP agent statistics.
Display the local engine ID.
Display SNMP group information.
Display remote engine IDs.
Display basic information about the notification
queue.
Display the modules that can generate notifications
and their notification status (enable or disable).
Display SNMPv3 user information.
Display SNMPv1
information. (This command is not supported in FIPS
mode.)
Display MIB view information.
Display SNMP MIB node information.
Display an SNMP context.
Command
snmp-agent { inform | trap } source
address for
interface-type interface-number
Enable
snmp-agent trap if-mib link extended
Configure
snmp-agent trap queue-size size
Configure
snmp-agent trap life seconds
or SNMPv2c
Command
display snmp-agent sys-info [ contact | location |
version ] *
display snmp-agent statistics
display snmp-agent local-engineid
display snmp-agent group [ group-name ]
display
[ vpn-instance
ipv6-address [ vpn-instance vpn-instance-name ] ]
display snmp-agent trap queue
display snmp-agent trap-list
display snmp-agent usm-user [ engineid engineid
| username user-name | group group-name ] *
community
display snmp-agent community [ read | write ]
display snmp-agent mib-view [ exclude | include |
viewname view-name ]
display snmp-agent
index-node | trap-node | verbose ]
display snmp-agent context [ context-name ]
76
Remarks
By default, SNMP uses the IP
address of the outgoing routed
interface as the
address.
By default, the SNMP agent
sends standard linkup/linkDown
notifications.
By default, the notification queue
can hold 100
messages.
The default notification lifetime is
120 seconds.
snmp-agent remote
vpn-instance-name
mib-node
source IP
notification
[ ip-address
] | ipv6
[ details |