HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual page 295

Operation Description
Rolls back the configuration. To
do so, you must specify the
configuration file in the <file>
element.
rollback finishes the rollback operation,
the current device configuration
is totally replaced with the
configuration in the specified
configuration file.
XML example
To roll back the current configuration to the
configuration in the file 1A.cfg:
<rpc message-id="101"
xmlns="urn:ietf:params:xml:ns:netconf:ba
After the device
se:1.0">
<rollback>
</rollback>
</rpc>
286
<file>1A.cfg</file>