Displaying And Maintaining Rmon Settings; Rmon Configuration Examples; Ethernet Statistics Group Configuration Example - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

Step
3. Create an entry in the
alarm table or private
alarm table.

Displaying and maintaining RMON settings

Execute display commands in any view.
Task
Display RMON statistics.
Display RMON history control
entries and history samples.
Display RMON alarm entries.
Display RMON private alarm
entries.
Display RMON event entries.
Display log information for
event entries.

RMON configuration examples

Ethernet statistics group configuration example

Network requirements
As shown in
traffic statistics for GigabitEthernet 1/0/1.
Figure 31 Network diagram
Server
Command
•
Create
rmon
sampling-interval
[
rising-falling
threshold-value1
falling-threshold
event-entry2 [ owner text ]
•
Create an entry in the private alarm table:
rmon prialarm entry-number prialarm-formula
prialarm-des sampling-interval { absolute |
delta } [ startup-alarm { falling | rising |
rising-falling
threshold-value1
falling-threshold
event-entry2 entrytype { forever | cycle
cycle-period } [ owner text ]
Command
display rmon statistics [ interface-type interface-number]
display rmon history [ interface-type interface-number ]
display rmon alarm [ entry-number ]
display rmon prialarm [ entry-number ]
display rmon event [ entry-number ]
display rmon eventlog [ entry-number ]
Figure 31, create an RMON Ethernet statistics entry on the device to gather cumulative
Device
GE1/0/1
an entry in the
alarm entry-number
{ absolute
startup-alarm { falling
} ]
} ]
IP network
86
Remarks
alarm table:
alarm-variable
| delta }
| rising | By default, the RMON
rising-threshold alarm table and the
private alarm table do
event-entry1
threshold-value2 not contain entries.
You can associate an
alarm with an event
that has not been
created yet, but the
alarm will trigger the
rising-threshold
event only after the
event-entry1
event is created.
threshold-value2