Step
Enabling the NQA client
Step
1.
Enter system view.
2.
Enable the NQA client.
Configuring NQA operations on the NQA client
NQA operation configuration task list
Tasks at a glance
(Required.) Perform at least one of the following tasks:
•
Configuring the ICMP echo operation
•
Configuring the ICMP jitter operation
•
Configuring the DHCP operation
•
Configuring the DNS operation
•
Configuring the FTP operation
•
Configuring the HTTP operation
•
Configuring the UDP jitter operation
•
Configuring the SNMP operation
•
Configuring the TCP operation
•
Configuring the UDP echo operation
•
Configuring the UDP tracert operation
•
Configuring the voice operation
•
Configuring the DLSw operation
•
Configuring the path jitter operation
(Optional.)
Configuring optional parameters for the NQA operation
(Optional.)
Configuring the collaboration feature
(Optional.)
Configuring threshold monitoring
(Optional.)
Configuring the NQA statistics collection feature
(Optional.)
Configuring the saving of NQA history records
(Required.)
Command
•
Scheduling the NQA operation on the NQA client
port-number
[
vpn-instance-name ] [ tos tos ]
UDP
listening
nqa server udp-echo ip-address
port-number
[
vpn-instance-name ] [ tos tos ]
Command
system-view
nqa agent enable
94
Remarks
vpn-instance
You can set the ToS value
in the IP header of reply
packets sent by the NQA
service:
server.
vpn-instance
Remarks
N/A
By default, the NQA client is enabled.
The NQA client configuration takes
effect after you enable the NQA
client.