HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual page 80

Step
3. (Optional.) Configure
system contact.
4. (Optional.) Configure
system location.
5. Enable SNMPv3.
6. (Optional.) Change the local
engine ID.
7. (Optional.) Configure
remote engine ID.
8. (Optional.) Create or update a
MIB view.
9. (Optional.) Create
SNMPv3 group.
Command
the
snmp-agent sys-info
sys-contact
the
snmp-agent sys-info location
sys-location
•
In non-FIPS
snmp-agent
version { all | { v1 | v2c |
v3 }* }
•
In FIPS
snmp-agent
version { all | { v1 | v2c |
v3 }* }
snmp-agent
engineid
snmp-agent remote { ip-address |
ipv6 ipv6-address
a
[
vpn-instance-name
engineid
snmp-agent
{ excluded |
view-name oid-tree
mask-value ]
•
In non-FIPS
snmp-agent
group-name [ authentication
| privacy ] [ read-view
an
view-name ] [ write-view
view-name ] [ notify-view
view-name ] [ acl acl-number
| acl ipv6 ipv6-acl-number ] *
•
In FIPS
71
Remarks
calculate-password command.
By default, the system contact is
Hewlett Packard Enterprise
contact
Company 3000 Hanover St
Palo Alto, CA94304
By default, the system location is
not configured.
mode:
sys-info
By default, SNMPv3 is used.
mode:
sys-info
By default, the local engine ID is
the company ID plus the device
ID.
IMPORTANT:
local-engineid
After you change the local
engine ID, the existing SNMPv3
users
become invalid, and you must
reconfigure them.
By default, no remote engine ID
is configured.
}
vpn-instance
To send informs to an SNMPv3
] engineid
NMS, you must configure the
SNMP engine ID of the NMS.
By default,
ViewDefault is predefined. In
this view, all the MIB objects in
the
snmpUsmMIB,
snmpVacmMIB,
snmpModules.18 subtrees are
accessible.
mib-view
included }
Each view-name oid-tree pair
[ mask
represents a view record. If you
specify the same record with
different MIB sub-tree masks
multiple times, the most recent
configuration
Except for the four sub-trees in
the default MIB view, you can
create up to 16 unique MIB view
records.
mode:
group v3
By default, no SNMP group
exists.
mode:
and encrypted keys
the MIB view
iso subtree but the
and
takes effect.