Monitoring And Maintaining Processes; Displaying And Maintaining Processes; Displaying And Maintaining User Processes - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

Monitoring and maintaining processes

HPE Comware V7 is a full-featured, modular, and scalable network operating system based on the
Linux kernel. Comware V7 software features run the following types of independent processes:
•
User process—Runs in user space. Most Comware V7 software features run user processes.
Each process runs in an independent space so the failure of a process does not affect other
processes. The system automatically monitors user processes. Comware V7 supports
preemptive multithreading. A process can run multiple threads to support multiple activities.
Whether a process supports multithreading depends on the software implementation.
•
Kernel thread—Runs in kernel space. A kernel thread executes kernel code. It has a higher
security level than a user process. If a kernel thread fails, the system breaks down. You can
monitor the running status of kernel threads.

Displaying and maintaining processes

Commands described in this section apply to both user processes and kernel threads. You can
execute these commands in any view.
The system identifies a process that consumes excessive memory or CPU resources as an anomaly
source.
To display and maintain processes:
Task
Display memory usage.
Display
information.
Display CPU
processes.
Monitor process running state.
Monitor thread running state.
For detailed information about the display memory [ slot slot-number ] command, see
Fundamentals Command Reference.

Displaying and maintaining user processes

Execute display commands in any view and other commands in user view.
Task
Display log information for all
user processes.
Display memory usage for all
user processes.
Display heap memory usage for a
user process.
Display the addresses of memory
Command
display memory [ slot slot-number [ cpu cpu-number ] ]
process state display process [ all | job job-id | name process-name ] [ slot
slot-number [ cpu cpu-number ] ]
usage for all
display process cpu [ slot slot-number [ cpu cpu-number ] ]
monitor process [ dumbtty ] [ iteration number ] [ slot slot-number
[ cpu cpu-number ] ]
monitor thread [ dumbtty ] [ iteration number ] [ slot slot-number
[ cpu cpu-number ] ]
Command
display process log [ slot slot-number [ cpu cpu-number ] ]
display process memory [ slot slot-number [ cpu cpu-number ] ]
display process memory heap job job-id [ verbose ] [ slot
slot-number [ cpu cpu-number ] ]
display process memory heap job job-id size memory-size [ offset
189